|
brushless speed control, bp speedcontrol,
Back
to speed controller index page
|
A great selection of
Brushless Motor Speed Controllers |
Castle Creations Phoenix-10
Brushless
Price $50.95
This speed controller is programmable making it ideal
for using with Lithium Polymer batteries. You can set the speed controller's
cut-off voltage to the correct value based on the number of cells in your
battery pack. The BEC circuit comes with a universal S-Type Connector. ( Futaba
, Hitec, JR, Airtronics Z)
| Part
#: |
PHX-10 |
|
|
Cells w/BEC: |
5-10 (6.0V - 12.0V) |
|
|
Cells w/o BEC: |
5 - 16 (6.0V - 19.2V) |
|
|
Continuous: |
10A |
|
|
Surge: |
15A |
|
|
Switching Rate: |
12,500 Hz |
|
|
Resistance: |
0.013 Ohms |
|
|
Brake: |
Yes |
|
|
Reversible: |
Yes - change any two wires |
|
|
Low Voltage Cut-Off: |
Programmable |
|
|
Size: |
0.73 x 0.8 x 0.16 in / 18.53 x 20.3 x 4.06 mm |
|
|
Weight (with wires): |
0.21 oz / 6 grams |
|
Castle Creations Thundrbird-18 Brushless
Speed Controller
Price $33.75
|
Features automatic Li-Poly cell detection right out of
the package - automatically adjusts cut-off voltage to
match 2S or 3S Li-Poly packs. Also features:
BEC
Safe "power on"
Low torque "soft start" protects gear boxes from shock
Simple setup
Tough surface mount construction
Smooth reverse exponential throttle
Audible arming signal
Self-calibrating endpoints
Auto motor cut-off with reset
Auto shut-down when signal is lost
Microprocessor controlled
Compatible with PHX-Link USB programmer
|
|
|
Castle Creations Phoenix 25 Brushless Speed
Controller
Price $69.95
| Part #:
PHX-25 |
 |
Phoenix-25 User Guide (PDF)
|
|
Cells w/BEC: |
5-10 (6.0V - 12.0V) |
|
|
Cells w/o BEC: |
5 - 16 (6.0V - 19.2V) |
|
|
Continuous: |
25A |
|
|
Surge: |
40A |
|
|
Switching Rate: |
11,000 Hz |
|
|
Resistance: |
0.0065 Ohms |
|
|
Brake: |
Yes |
|
|
Reversible: |
Yes - change any two wires |
|
|
Low Voltage Cut-Off: |
Programmable |
|
|
Size: |
1.08 x 0.91 x 0.16 in. / 27.4 x 23.1 x 4 mm |
|
|
Weight (with wires): |
0.6 oz. / 17 grams |
Castle Creations Phoenix-35 Brushless Speed
Controller
Price $85.00
At 35 amps of power
capacity, the Phoenix-35 is suited for medium current installations, but is
still extremely small and light. The Phoenix-35 is suited for use with Aveox
2713 and 2726 motors, Astro 020, and 05 motors, Hacker B40 motors, Mega
1615/2210, and Kontronik 480 size brushless motors.
The Phoenix-35 gives you the flexibility you've come to expect from Castle
Creations controllers. With a total of 7 user-programmable features this speed
control has it all! Fly it in 480 to 500-size sport and sailplanes or fixed or
collective pitch helis like the Corona, ECO8, or JR Voyager.
Phoenix-35 User Guide (PDF
Castle Creations Phoenix-45
Brushless Speed Controller
Price $101.95
|
Part #:
|
PHX-45
|
|
Cells w/BEC:
|
5-12
|
|
Cells w/o BEC:
|
5-16
|
|
Continuous:
|
45A
|
|
Surge:
|
60A
|
|
Switching Rate:
|
Programmable (11, 22, or
41KHz) |
|
Resistance:
|
0.0026 Ohms
|
|
Brake:
|
Yes
|
|
Reversible:
|
Yes - change any two
wires |
|
Low Voltage Cut-Off:
|
Programmable
|
|
Size:
|
0.95 x 1.72 x 0.4 in. /
24.1 x 43.7 x 10.2 mm |
|
Weight (with wires):
|
1.0 oz / 30 grams
|
Because this speed controller is programmable
it is ideal for using with Lithium Polymer batteries. You can set the speed
controller's cut-off voltage to the correct value based on the number of cells
in your battery pack. The BEC circuit comes with a universal S-Type connector
also know as a JR/Hitec connector. Comes with instruction manual.
Phoenix-45 User Guide (PDF
Castle Creations Phoenix -60 Brushless
Motor Speed Controller
Price $119.00
For higher power airplane or
helicopter applications, the Phoenix-60 is an excellent speed control choice.
The Phoenix line offers greater flexibility to the modeler by providing an
unprecedented variety of programmable features. These options allow it to be
used in nearly any application suitable for its current rating. Use it with
Aveox 36xx series motors, Astro 05, Hacker B40 and C40 motors, Mega 2230 and
2245, and Kontronik 500 or 600 size brushless motors. With the now familiar
programming options in the Phoenix line, the Phoenix-60 can be set for
helicopter installations (including those with collective pitch) or airplanes.
Competition flyers will benefit from the Phoenix-60's adjustable switching rate
to insure optimum efficiency in their models.
Phoenix-60 User Guide (PDF
Motor Max Motors 32A/35A
Brushless Speed Control
Price $50.00
|
|
|
Maximum Load:
|
35A (for 60
seconds) / 32A Continuous |
|
Working
Voltage: |
2 - 3 Li-Poly
Cells |
|
Working Temp:
|
0 to +45C
|
|
Maximum RPM:
|
2-pole motor -
190000RPM
6-pole motor - 63,333RPM
8-pole motor - 47,500RPM |
|
Weight:
|
21.1 grams / 0.74
oz |
|
|
|
Supports 2, 6, 8, 12, and 14 pole motors
Programmable brake
Automatic cell count detection for auto-cutoff
Soft auto-shutdown at 2.5V/cell
Hard auto-shutdown at 2.3V per cell
Will operate on 4 Li-Poly cells with BEC disabled, but not
recommended
2 Amp, 5V BEC
|
BP 10A Brushless ESC
Price $21.00
|
Low resistance// High rate PWM//
Sixteen cells Max (with BEC disabled)// User programmable brake// Low
voltage auto setting based on battery// Throttle range self-adjusting//
Soft start ramp up// Runs motor in forward or reverse// Auto motor
cutoff with reset//Safe power arming program ensures motor will not run
accidentally after turn on// Low torque start// Auto shut down when
signal is lost
|
|
Weight:
|
7.1 grams / 0.25 oz
(with wire) |
|
Size:
|
22 x 18 x 5 mm /
0.9 x 0.7 x 0.2 in. |
|
Constant Current:
|
10A
|
|
Max Current:
|
13A (for ten seconds)
|
|
FET:
|
6 |
|
BEC:
|
Yes, 1.5A
|
|
TIMING:
|
Auto
|
|
PWM:
|
8K |
|
Input:
|
2/3 Li-Poly or 4/12 Ni-MH
|
|
Low-Voltage Cutoff:
|
Auto detect and set
|
BP 15A Brushless ESC
Price $29.95
Low resistance /High rate PWM/19.2V
Max (with BEC disabled)/User programmable brake/Low
voltage auto set with jumper/ Throttle range
self-adjusting / Soft start ramp up/ Runs motor in
forward or reverse/2-Cell/3-Cell Lipoly Cutoff/
Safe power arming program ensures motor will not run
accidentally after turn on/ Low torque start/ Auto shut
down when signal is lost / Comes with surface mounted
heat sink
|
|
|
Weight:22.1 grams / 0.78 oz. /
Size:45 x 25 x 15 mm / 1.8 x 1.0 x 0.6
in. / Constant Current: 15A / Max Current 25A (10 seconds) / FET:
12/ BEC: Yes, 1.5A /TIMING: Auto / PWM: 8K /
Input: 2/3 Li-Poly / Low-Voltage
Cutoff: 2 cell Li-Poly 5V, 3 cell Li-Poly 7.5V
Price $40.00
BP30A Brushless ESC
|
Weight:
|
20.7 grams / 0.73 oz
(with wire) |
|
Size:
|
50 x 25 x 10 mm / 2 x 1
x 0.4 in. |
|
Constant Current:
|
30A
|
|
Max Current:
|
40A
|
|
FET:
|
15 |
|
BEC:
|
Yes, 1.5A
|
|
TIMING:
|
Auto
|
|
PWM:
|
8K |
|
Input:
|
2/3 Li-Poly or 4/12 Ni-MH
|
|
Low-Voltage Cutoff:
|
Auto detect and set |
|
Low resistance
High rate PWM
Sixteen cells Max
(with BEC disabled)
User programmable
brake
Low voltage auto
setting based on battery
Throttle range
self-adjusting
Soft start ramp up
Runs motor in forward
or reverse
Auto motor cutoff
with reset
Safe power arming
program ensures motor will not run accidentally after
turn on
Low torque start
Auto shut down when
signal is lost
|
|
Price
$37.90
BP
40AMP Brushless
|
Weight:
|
21.9 grams / 0.77 oz
|
|
Size:
|
50 x 25 x 11 mm / 2 x
1 x 0.44 in.
|
|
Constant Current:
|
40A
|
|
Max Current:
|
60A
|
|
FET:
|
18.5 oz / 529 grams
|
|
BEC:
|
Yes, 4A, 3 Li-Poly
Cells Max
|
|
TIMING:
|
Programmable -
3/8/15/30
|
|
PWM:
|
Programmable -
8/16/32K
|
|
Input:
|
2 to 4 cell Li-Poly or
6-16 Ni-MH
|
|
Low-Voltage Cutoff:
|
Programmable
|
|
|
|
|
|
BP 60A Brushless ESC
Price $49.50
|
Weight:
|
40 grams / 1.41 oz.
|
|
Size:
|
75 x 25 x 10 mm / 3 x 1 x 0.4
in. |
|
Constant Current:
|
60A |
|
Max Current:
|
80A |
|
FET:
|
24 |
|
BEC:
|
Yes, 4A |
|
TIMING:
|
Programmable - 3/8/15/30
|
|
PWM:
|
Programmable - 8/16/32K
|
|
Input:
|
2 to 5 cell Li-Poly or 6/18
Ni-MH |
|
Low-Voltage Cutoff:
|
Programmable
|
|
|
|
|
Low resistence
High rate PWM
Sixteen cells Max
(with BEC disabled)
User programmable
brake
User programmable
low-voltage cutuoff
User programmable
timing advance
User programmable PWM
Throttle range
self-adjusting
Soft start ramp up
Runs motor in forward
or reverse
Auto motor cutoff with
reset
Safe power arming
program ensures motor will not run accidentally
after turn on
Low torque start
Auto shut down when
signal is lost
BP 40A/60A Brushless ESC
Programming Guide
|
|
|
GWESC15A
Please
read the instruction carefully before you use the speed controller.
The
default setting for GWESC15A Brushless Motor Speed Controller is
with brake feature on.
With
auto-detection feature, only use Li-Poly Batteries for GWESC15A
Brushless Motor Speed Controller. Operating Current: 10 Amp. Peak
Current: 15 Amp. Maximum Voltage: 15 Volts.
Weight:
17g (0.6oz)
Input Voltage: 2-4 cells Li-Poly
Batteries
Built-in
Battery Eliminator Circuit
Max.
Current 22.5A when apply 7.4 Volts.
Max.
Current 15.0A when apply 11.1 Volts.
Max.
Current 10.0A when apply 14.8 Volts
Weight:
17g (0.6oz)
InPrice $25.00
ADD
TO CARTries
Built-in
Battery Eliminator Circuit
Max.
Current 22.5A when apply 7.4 Volts.
Max.
Current 15.0A when apply 11.1 Volts.
Max.
Current 10.0A when apply 14.8 Volts
|
|
